Settings; Information - GBC StreamPunch Ultra Service Manual

Settings

Backgage
The Backgage feature allows you to scroll up or down to change the
backgage setting.
Alignment
The Alignment feature allows you to scroll up or down to change the
alignment setting.
You can change the alignment of the paper passing through the punch
inboard and outboard +2.0 mm.
Clear Cover
The Clear Cover feature allows you to set the Backgage and Alignment
values for Clear Cover media only. This setting does not affect any other
type of media.
Language
The Language feature allows you to select the language for the user
interface. The language options are: English, Francais, Espanol, Deutsch,
and Italiano.
Units
The Units feature allows you to select the units displayed on the user
interface. Select MM for millimeters of IN for inches.
General Procedures and Information

Information

The User Interface allows you to view information about. Die Type, Die
Cycles, Punch Cycles, and Firmware
Die Type
The Die Type feature identifies the type of Die Set installed to the
StreamPunch Ultra/Ultra MP.
Die Cycles
The Die Cycles feature lists the number of punch cycles completed by the
die set that is presently installed in the machine.
Punch Cycles
The Punch Cycles feature lists the number of punch cycles completed by
the Punch.
Firmware
The Firmware feature identifies the level of the firmware installed to the
StreamPunch Ultra/Ultra MP.
GBC StreamPunch Ultra/Ultra MP
11-05-2018
6-4