Glossary Of Terms - GBC StreamPunch Ultra Service Manual

Glossary of Terms

These terms are common to the punch and bindery industry.
Alignment
A predetermined distance of the top punched hole from
the side edge of the sheet (viewed from the punch
output orientation.
Backgage A predetermine distance from the trail edge of the
sheet of paper to the punched hole(s).
Deskew
The term used to describe the process of aligning the
sheet of paper until it is parallel to the paper path.
Skew
The term used to describe the fact that the sheet of
paper is not parallel to the paper path.
General Procedures and Information
GBC StreamPunch Ultra/Ultra MP
11-05-2018
6-72