Siemens SINAMICS S110 List Manual page 450

Parameter
List of parameters
Caution: If the selected subdirectory contains a number of data sets, "More Datasets" is displayed in r4694[0...19].
If there is no SMI data (motor/encoder data) in the selected subdirectory or if the selected subdirectory does not
exist, the following applies:
- The number of the next subdirectory located is displayed.
- This subdirectory is not checked for valid SMI data.
- If another subdirectory cannot be located, nothing is displayed in r4694[0...19].
Note: SMI: SINAMICS Sensor Module Integrated
p4700[0...1] Trace control / Trace control
CU_S110-CAN, Can be changed: U, T
CU_S110-DP,
Data type: Integer16
CU_S110-PN
P-Group: Trace and function generator
Not for motor type: -
Min
0
Description: Setting to control the trace function.
Value: 0:
1:
Index: [0] = Trace 0
[1] = Trace 1
p4701 Measuring function, control / Meas fct ctrl
CU_S110-CAN, Can be changed: U, T
CU_S110-DP,
Data type: Integer16
CU_S110-PN
P-Group: Trace and function generator
Not for motor type: -
Min
0
Description: Setting to control the measurement function.
Value: 0:
1:
2:
3:
r4705[0...1] Trace status / Trace status
CU_S110-CAN, Can be changed: -
CU_S110-DP,
Data type: Integer16
CU_S110-PN
P-Group: Trace and function generator
Not for motor type: -
Min
0
Description: Displays the actual status of the trace.
Value: 0:
1:
2:
3:
4:
Index: [0] = Trace 0
[1] = Trace 1
1-450
Stop trace
Start trace
Stop measuring function
Start measuring function
Measuring function, check parameterization
Start measuring function without enable signals
Trace inactive
Trace is recording presamples
Trace is waiting for trigger event
Trace is recording
Recording (trace) ended
Calculated: -
Dynamic index: -
Units group: -
Scaling: -
Max
1
Calculated: -
Dynamic index: -
Units group: -
Scaling: -
Max
3
Calculated: -
Dynamic index: -
Units group: -
Scaling: -
Max
4
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
0
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
0
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
-