Siemens SINAMICS S110 List Manual page 436

Parameter
List of parameters
13 p1717 accepted
18 p0316 accepted
19 p0317 accepted
20 p0327 accepted
21 p0328 accepted
22 p0341 accepted
23 kT characteristic parameter accepted
24 p0348 accepted
Dependency: Refer to: r3925
r3930[0...4] Power unit EEPROM characteristics / PU characteristics
CU_S110-CAN, Can be changed: -
CU_S110-DP,
Data type: Unsigned16
CU_S110-PN
P-Group: -
Not for motor type: -
Min
-
Description: Displays the characteristics (A5E number and versions) of the power unit.
[0]: A5E number xxxx (A5Exxxxyyyy)
[1]: A5E number yyyy (A5Exxxxyyyy)
[2]: File version (logistic)
[3]: File version (fixed data)
[4]: File version (calib data)
p3950 Service parameter / Serv. par.
CU_S110-CAN, Can be changed: C1, U, T
CU_S110-DP,
Data type: Unsigned16
CU_S110-PN
P-Group: -
Not for motor type: -
Min
-
Description: For service personnel only.
r3974 Drive unit status word / Drv_unit ZSW
CU_S110-CAN, Can be changed: -
CU_S110-DP,
Data type: Unsigned32
CU_S110-PN
P-Group: -
Not for motor type: -
Min
-
Description: Displays the status word for the drive unit.
Bit field: Bit Signal name
00 Software reset active
01 Writing of parameters disabled as parame-
ter save in progress
02 Writing of parameters disabled as macro is
running
1-436
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Calculated: -
Dynamic index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dynamic index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dynamic index: -
Units group: -
Scaling: -
Max
-
1 signal
Yes
Yes
Yes
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
No -
No -
No -
No -
No -
No -
No -
No -
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 1
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
0 signal FP
No -
No -
No -