Memory Failure - Xerox Phaser 3330 Service Manual

Troubleshooting

Memory Failure

System memory is full or a failure detected.
Applicable Error
• 03-600: Memory Failure
• 03-601: EPC Memory is Full
Initial Actions
• Remove and re-seat memory DIMMs.
• Increase system memory.
• Delete unnecessary files or split the Fax job into smaller transmissions.
• If problem persists use the following procedure.
Troubleshooting Reference Table
Applicable Parts
• Memory (Specifications).
• Main PWB: Phaser 3330 (PL 1.0.7,
List 1.0 Phaser 3330
3335 and 3345 (PL 6.1.7,
WorkCentre 3335/3345
Troubleshooting Procedure Table
Step Actions and Questions
1. Turn the machine off and then on.
Does the error persist?
2. Re-seat memory DIMM on the Main PWB.
Does the error persist?
2-78 Phaser 3330 and WorkCentre 3335/3345
Service Manual
Wiring and Plug/Jack Map Reference
• Phaser 3330 Main PWB Connector Designators
Parts • Phaser 3330 Control Panel PWB
Main), WorkCentre
• Wiring Diagrams for P3330/WC3335/WC3345
Parts List 6.1
• WorkCentre 3335/3345 Main PWB Connector Designators
Main).
Yes
Go to step 2.
Install a new Main PWB:
• Phaser 3330 (PL
1.0.7, Parts List 1.0
Phaser 3330 Main)
• WorkCentre 3335 and
3345 (PL 6.1.7, Parts
List 6.1 WorkCentre
3335/3345 Main).
No
Complete.
Complete.
Xerox Internal Use Only