Management Macro Short-Code Number - Auerswald COMpact 5200 Advanced Information

Management Macro Short-Code Number

Management Macro Short-Code Number
Proceed as follows:
Using the Configuration Manager (page Fonctions > Macros de
•
numérotation abrégée)
Important: For short-code macros, the automatic exchange line
request is always enabled. Therefore, short-code macros with postdialling
could have problems with the length check so that the area code must
always be dialled.
Note: The replacement of an internal number by another internal
number is not supported.
Note: It is not possible to integrate a macro into another macro.
Macro types:
Simple digit sequence that is replaced by the macro short-code.
• 0-9
*
•
• #
Character sequence that by dialling the macro short-code is transferred to
the macro dialler and then started.
Z (0-9, *, #)
•
• W (1-5) waiting time/break time of 1-5 s
• H Hang up with hook key
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 1011 -