Subaru Legacy 2003 Service Manual page 2156

3.0 L model
<Ref. to EX(H6DO)-5, REMOVAL, Front Exhaust
Pipe.>, <Ref. to EX(H6DO)-8, REMOVAL, Rear
Exhaust Pipe.> and <Ref. to EX(H6DO)-9, RE-
MOVAL, Muffler.>
19) Remove center and rear exhaust pipes, and
muffler. (TURBO model)
<Ref. to EX(H4DOSTC)-7, REMOVAL, Center Ex-
haust Pipe.>, <Ref. to EX(H4DOSTC)-12, RE-
MOVAL, Rear Exhaust Pipe.> and <Ref. to
EX(H4DOSTC)-13, REMOVAL, Muffler.>
20) Remove heat shield cover.
21) Drain ATF to remove ATF drain plug.
(A) Oil pan
(B) Drain plug
22) Disconnect ATF cooler hoses from pipes of
transmission side, and remove ATF level gauge
guide.
23) Remove propeller shaft.
<Ref. to DS-14, REMOVAL, Propeller Shaft.>
AUTOMATIC TRANSMISSION ASSEMBLY
AT-00682
( B )
( A )
AT-00080
AT-00683
24) Remove shift select cable. <Ref. to CS-12, RE-
MOVAL, Select Cable.>
25) Disconnect stabilizer link from transverse link.
26) Remove bolt securing ball joint of transverse
link to housing.
27) Remove spring pins and separate front drive
shafts from each side of the transmission.
28) Remove nuts which hold lower side of trans-
mission to engine.
Except 3.0 L model
3.0 L model
AT-41
AUTOMATIC TRANSMISSION
AT-00684
AT-00685
AT-00108
AT-00686