STARTING/CHARGING SYSTEMS
6) Remove the shaft assembly and overrunning
clutch from front bracket as a unit.
NOTE:
Check the following points before removal.
• Lever direction
• Position of internal gear assembly
( B )
(A) Lever
(B) Shaft ASSY
(C) Overrunning clutch
(D) Internal gear ASSY
7) Remove the overrunning clutch from shaft as-
sembly as follows:
(1) Remove the stopper from ring by lightly tap-
ping the stopper with an appropriate tool (such
as a fit socket wrench).
( A )
( D )
( C )
SC-00153
SC(H4DOSTC)-8
STARTER
(2) Remove the ring, stopper and clutch from
shaft.
(A) Socket wrench
(B) Ring
(C) Shaft
(D) Stopper
2. BRUSH HOLDER
Unlock metal clip fixing insulation plate to brush
holder and remove insulation plate.
(A) Brush holder
(B) Insulation plate
(C) Metal clip
( A )
( B )
( D )
( C )
( B )
( C )
SC-00014
( A )
SC-00154