Subaru Legacy 2003 Service Manual page 1772

5. Water Pump
A: REMOVAL
1) Disconnect ground cable from battery.
2) Lift-up the vehicle.
3) Remove under cover.
4) Drain engine coolant completely.
<Ref. to CO(H4DOSTC)-15, DRAINING LOF EN-
GINE COOLANT, REPLACEMENT, Engine Cool-
ant.>
5) Remove radiator under cover.
6) Disconnect connectors from radiator main fan
(A) and sub fan (B) motors.
( A )
7) Remove bolt and clamps, and then remove wa-
ter by-pass pipe. (MT model)
8) Disconnect radiator outlet hose (A) and heater
hose (B) from water pump.
WATER PUMP
9) Disconnect water by-pass hose (C) and oil cool-
er hose (D).
10) Lower the vehicle.
FU-00009
11) Remove air intake duct.
12) Disconnect overflow hose.
( B )
CO-00084
13) Remove reservoir tank.
CO-00147
14) Remove radiator main fan and sub fan assem-
blies. <Ref. to CO(H4DOSTC)-28, REMOVAL, Ra-
diator Main Fan and Fan Motor.> and <Ref. to
CO(H4DOSTC)-30, REMOVAL, Radiator Sub Fan
and Fan Motor.>
CO(H4DOSTC)-17
( C )
( A )
( D )
CO-00148
CO-00086
CO-00087
COOLING
( B )
IN-00059