Subaru Legacy 2003 Service Manual page 2606

Camber is
increased.
Camber is
decreased.
3) Tighten the two self-locking nuts.
Tightening torque:
152 N·m (16 kgf-m, 116 ft-lb)
WHEEL ALIGNMENT
Left side
Rotate counter-
clockwise.
FS-00009
Rotate clockwise.
FS-00010
FS-9
FS-00010
FS-00009
3. CASTER
• Inspection
1) Place front wheel on turning radius gauge. Make
sure ground contacting surfaces of front and rear
wheels are set at the same height.
2) Set ST into the center of the wheel, and then in-
stall the wheel alignment gauge.
ST 927380002 ADAPTER
( 1 )
( 2 )
(1) Alignment gauge
(2) Turning radius gauge
3) Follow the wheel alignment gauge operation
manual to measure the caster angle.
NOTE:
Refer to the "SPECIFICATIONS" for the caster val-
ues. <Ref. to FS-2, SPECIFICATIONS, General
Description.>
FRONT SUSPENSION
Right side
Rotate clockwise.
Rotate counter-
clockwise.
ST
FS-00007