Subaru Legacy 2003 Service Manual page 2370

DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)
Step
11 CHECK HARNESS CONNECTOR BETWEEN
TRANSMISSION AND 2-4 BRAKE DUTY SO-
LENOID.
Measure resistance of harness between 2-4
brake duty solenoid and transmission connec-
tor.
Connector & terminal
(T4) No. 9 — (AT7) No. 1:
Is the measured value less than the specified
value?
12 CHECK HARNESS CONNECTOR BETWEEN
TRANSMISSION AND 2-4 BRAKE DUTY SO-
LENOID.
Measure resistance of harness between trans-
mission connector and transmission ground.
Connector & terminal
(T4) No. 9 — Transmission ground:
Does the measured value exceed the specified
value?
AUTOMATIC TRANSMISSION (DIAGNOSTICS)
Value
1 Ω
1 MΩ
AT-95
Yes
Go to step 12. Repair open circuit
in harness
between 2-4 brake
duty solenoid and
transmission con-
nector.
Even if "POWER" Repair short circuit
indicator lights up, in harness
the circuit has between 2-4 brake
returned to a nor- duty solenoid and
mal condition at transmission con-
this time. A tempo- nector.
rary poor contact
of the connector or
harness may be
the cause. Repair
harness or con-
nector in line pres-
sure duty solenoid
and transmission.
No