Subaru Legacy 2003 Service Manual page 1750

4) Connect the center exhaust pipe (LH) to primary
turbocharger.
Tightening torque:
35 N·m (3.6 kgf-m, 26.0 ft-lb)
(B)
(A)
(A) Center exhaust pipe (LH)
(B) Primary turbocharger
5) Install the center exhaust pipe to rear exhaust
pipe.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
6) Connect the connector to rear oxygen sensor.
CENTER EXHAUST PIPE
7) Secure clip on the crossmember.
8) Tighten the bolt which holds center exhaust pipe
bracket to transmission.
Tightening torque:
EX-00084
9) Tighten the bolts which hold center exhaust pipe
to hanger bracket.
Tightening torque:
10) Lower the vehicle.
EX-00085
11) Place the turbocharger cover (RH), and then
tighten the bolts which install turbocharger cover
(RH).
Tightening torque:
FU-00669
EX(H4DOSTC)-9
30 N·m (3.1 kgf-m, 22.4 ft-lb)
35 N·m (3.6 kgf-m, 26.0 ft-lb)
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
EXHAUST
EX-00086
EX-00087
EX-00081