Subaru Legacy 2003 Service Manual page 2495

MANUAL TRANSMISSION AND DIFFERENTIAL
C: DISASSEMBLY
1) Using ST, remove roller bearing (extension case
side).
ST 498077000 REMOVER
( A )
(A) Roller bearing
2) Using ST1 and ST2, remove roller bearing
(transfer case side).
ST1 498077000 REMOVER
ST2 899864100 REMOVER
( A )
(A) Roller bearing
TRANSFER DRIVEN GEAR
ST
MT-00143
ST2
ST1
MT-00144
MT-54
D: ASSEMBLY
1) Using ST, install roller bearing (extension case
side).
ST1 398177700 INSTALLER
ST2 899864100 REMOVER
NOTE:
Do not apply pressure in excess of 10 kN (1 ton, 1.1
US ton, 1.0 Imp ton)
( A )
(A) Roller bearing
2) Using ST, install roller bearing (transfer case
side).
ST 499757002 INSTALLER
NOTE:
Do not apply pressure in excess of 10 kN (1 ton, 1.1
US ton, 1.0 Imp ton)
(A) Roller bearing
E: INSPECTION
1) Bearings
Replace bearings in the following cases:
• Broken or rusty bearings
• Worn or damaged
• Bearings that fail to turn smoothly or make ab-
normal noise when turned after gear oil lubrication.
2) Driven gear
Replace drive gear in the following cases:
• If their tooth surfaces and shaft are excessively
broken or damaged.
ST2
ST1
MT-00145
ST
( A )
MT-00146