Subaru Legacy 2003 Service Manual page 2249

AUTOMATIC TRANSMISSION
5) Install ST to high clutch piston.
ST 498437000 HIGH CLUTCH PISTON
GAUGE
6) Avoid folding the high clutch piston seal, when
installing the cover to high clutch piston.
7) Using ST1 and ST2, install snap ring.
ST1 398673600 COMPRESSOR
ST2 498627100 SEAT
ST3 498437000 HIGH CLUTCH PISTON
GAUGE
8) Install the thickest driven plate to piston side,
and then install the driven plate, drive plate, retain-
ing plate to high clutch drum.
9) Install snap ring to high clutch drum.
HIGH CLUTCH AND REVERSE CLUTCH
ST
AT-00243
ST1
ST3
ST2
AT-00244
AT-00245
10) Apply compressed air intermittently to check for
operation.
11) Measure the clearance between the retaining
plate and snap ring.<Ref. to AT-135, INSPEC-
TION, High Clutch and Reverse Clutch.>
12) Install driven plate, drive plate, retaining plate
and snap ring.
13) Apply compressed air intermittently to check for
operation.
14) Measure the clearance between the retaining
plate and snap ring.<Ref. to AT-135, INSPEC-
TION, High Clutch and Reverse Clutch.>
AT-134
AT-00246
AT-00247
AT-00248