Subaru Legacy 2003 Service Manual page 1679

MECHANICAL
(3) Screw the 6 mm dia. bolt into release fork
shaft, and remove it.
(A) Shaft
(B) Bolt
(4) Raise the release fork, and then unfasten
the release bearing tabs to free release fork.
NOTE:
Step (4) is required to prevent interference with en-
gine when removing the engine from transmission.
21) Separate the torque converter clutch from drive
plate. (AT vehicles)
(1) Lower the vehicle.
(2) Remove the service hole plug.
(3) Remove the bolts which hold torque con-
verter clutch to drive plate.
(4) Remove the other bolts while rotating the
engine using socket wrench.
ENGINE ASSEMBLY
( A )
( B )
ME-00043
ME-00044
ME(H4DOSTC)-34
22) Remove the pitching stopper.
23) Disconnect the fuel delivery hose, return hose
and evaporation hose.
NOTE:
• Catch fuel from the hose into container.
• Disconnect the hose with its end wrapped with
cloth to prevent fuel from splashing.
24) Support the engine with a lifting device and
wire ropes.
MT-00069
ME-00045
ME-00047