Subaru Legacy 2003 Service Manual page 2497

MANUAL TRANSMISSION AND DIFFERENTIAL
13.Reverse Check Sleeve
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to MT-32, REMOVAL, Manual
Transmission Assembly.>
2) Remove the transfer case with extension case
assembly. <Ref. to MT-47, REMOVAL, Transfer
Case and Extension Case Assembly.>
3) Remove shifter arm.
4) Remove plug, spring washer and reverse check
ball.
5) Remove the reverse check sleeve.
B: INSTALLATION
1) Install the reverse check sleeve.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
REVERSE CHECK SLEEVE
2) Install ball, spring, washer and plug to transfer
case.
Tightening torque:
3) Install the shifter arm to transfer case assembly.
4) Install the transfer case with extension case as-
sembly. <Ref. to MT-47, INSTALLATION, Transfer
Case and Extension Case Assembly.>
5) Install the manual transmission assembly to ve-
hicle. <Ref. to MT-35, INSTALLATION, Manual
MT-00149
Transmission Assembly.>
C: DISASSEMBLY
1) Cover the reverse check sleeve with a rag, and
remove snap ring using a screwdriver.
NOTE:
Replace snap ring with a new one if deformed or
weakened.
MT-00150
MT-00151
MT-56
10 N·m (1.0 kgf-m, 7.2 ft-lb)
( A )
(A) Snap ring
MT-00152
MT-00153