Subaru Legacy 2003 Service Manual page 2178

3) Remove the upper-lower valve body tightening
bolts.
NOTE:
Arrange the removed bolts in good order to assem-
ble in the same place as disassembly, because the
bolts length are different.
D
B B
A
A
A
4) Remove the lower valve body.
5) Remove the oil filter and plate.
(A)
(A) Oil filter
(B) Plate
6) Remove six steel balls from middle valve body.
(A) Steel ball
(B) Middle valve body
7) Remove the middle valve body.
CONTROL VALVE BODY
C
B
B
B
B
D
AT-00904
(B)
AT-00068
( B )
( A )
AT-00069
8) Remove upper separator plate from middle
valve body.
( A )
(A) Upper separator plate
(B) Side plate
9) Remove valve springs and four steel balls from
upper valve body.
10) Place a shop cloth to the piston removal hole.
11) Using an air compressor, apply air slowly to
each piston hole and remove the pistons.
12) Remove the seal ring from piston.
AT-63
AUTOMATIC TRANSMISSION
( B )
AT-00070
AT-00071
AT-00072