Subaru Legacy 2003 Service Manual page 1805

LUBRICATION
2) Install oil strainer onto baffle plate.
CAUTION:
Replace O-ring with a new one.
Tightening torque:
10 N·m (1.0 kgf-m, 7 ft-lb)
3) Apply fluid gasket to mating surfaces and install
oil pan.
Fluid gasket:
Part No. 004403007
THREE BOND 1215 or equivalent
4) Mount oil pan on engine block.
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
5) Lower engine onto front crossmember.
OIL PAN AND STRAINER
6) Tighten nuts which secure front cushion rubber
onto front crossmember.
Tightening torque:
LU-00032
7) Install under cover.
8) Lower the vehicle.
CAUTION:
When lowering vehicle, wire rope must be re-
leased at the same time.
9) Remove lifting device and steel cables.
LU-00034
10) Install pitching stopper.
Tightening torque:
LU-00031
LU(H4DOSTC)-16
69 N·m (7.0 kgf-m, 51 ft-lb)
T1: 50 N·m (5.1 kgf-m, 37 ft-lb)
T2: 58 N·m (5.9 kgf-m, 43 ft-lb)
T2
LU-00030
LU-00028
T1
ME-00218