Subaru Legacy 2003 Service Manual page 2490

TRANSFER CASE AND EXTENSION CASE ASSEMBLY
16) Install extension assembly into transfer case.
Tightening torque:
40 N·m (4.1 kgf-m, 29.7 ft-lb)
17) Install shifter arm to transfer case.
18) Hang the shifter arm on the 3rd-4th fork rod.
(A) Shifter arm
(B) 3rd - 4th fork rod
MT-00125
MT-00126
( A )
( B )
MT-00127
MANUAL TRANSMISSION AND DIFFERENTIAL
19) Install transfer case with extension case as-
sembly to transmission case.
Tightening torque:
24.5 N·m (2.5 kgf-m, 18.1 ft-lb)
C: DISASSEMBLY
1. TRANSFER CASE
1) Remove reverse check assembly. <Ref. to MT-
56, REMOVAL, Reverse Check Sleeve.>
2) Remove oil guide.
2. EXTENSION CASE
1) Remove transfer drive gear assembly. <Ref. to
MT-51, REMOVAL, Transfer Drive Gear.>
2) Remove shift bracket.
3) Remove oil seal from extension case. <Ref. to
MT-41, Oil Seal.>
MT-49
MT-00116
MT-00129
MT-00130