Subaru Legacy 2003 Service Manual page 2568

2. Clutch Disc and Cover
A: REMOVAL
1. EUROPE AND AUSTRALIA NON-TURBO
MODELS
1) Remove transmission assembly from vehicle
body. <Ref. to MT-32, REMOVAL, Manual Trans-
mission Assembly.>
2) Insert ST on flywheel.
ST 499747100 CLUTCH DISC GUIDE
( A )
(A) Dual mass flywheel
3) Put matching marks on flywheel and clutch cov-
er before removing clutch cover.
4) Remove clutch cover and clutch disc.
NOTE:
• Take care not to allow oil on the clutch disc fac-
ing.
• Do not disassemble either clutch cover or clutch
disc.
• Put matching marks to flywheel and clutch cover
before removing clutch cover.
CLUTCH DISC AND COVER
2. EXCEPT EUROPE AND AUSTRALIA
NON-TURBO MODELS AND TURBO MOD-
EL
1) Remove transmission assembly from vehicle
body. <Ref. to MT-32, REMOVAL, Manual Trans-
mission Assembly.>
2) Install ST on flywheel.
ST 499747100
ST
CL-00112
3) Remove clutch cover and clutch disc.
NOTE:
• Take care not to allow oil on the clutch disc fac-
ing.
• Do not disassemble either clutch cover or clutch
disc.
B: INSTALLATION
1. EUROPE AND AUSTRALIA NON-TURBO
MODELS
1) Insert ST into the clutch disc and install them on
the flywheel by inserting the ST end into the pilot
bearing.
NOTE:
CL-00113
When installing clutch disc, be careful its direction.
ST 499747100
CL-15
CRANKSHAFT STOPPER
( A )
(A) Clutch cover
CLUTCH DISC GUIDE
(A) Flywheel
(B) Flywheel side
CLUTCH SYSTEM
ST
CL-00011
ST
(A)
CL-00114