14) Drain engine oil.
Set container under the vehicle, and remove drain
plug from oil pan.
(A)
(B)
(A) Gasket
(B) Drain plug
15) Remove nuts which secure front cushion rub-
ber onto front crossmember.
16) Remove bolts which secure oil pan on cylinder
block while raising up engine.
17) Insert oil pan cutter blade between cylinder
block-to-oil pan clearance.
CAUTION:
Do not use a screwdriver or similar tool in place
of oil pan cutter.
OIL PAN AND STRAINER
18) Remove oil strainer.
19) Remove baffle plate.
LU-00151
B: INSTALLATION
NOTE:
Before installing oil pan, clean sealant from oil pan
and engine block.
LU-00030
1) Install baffle plate.
Tightening torque:
LU-00031
LU(H4DOSTC)-15
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
LUBRICATION
LU-00032
LU-00033
LU-00033