Subaru Legacy 2003 Service Manual page 1788

12.Coolant Filler Tank
A: REMOVAL
WARNING:
The radiator is pressurized. Wait until the en-
gine cools down before working on the radia-
tor.
1) Drain the coolant about 3.0 2 (3.2 US qt, 2.6
lmp qt). <Ref. to CO(H4DOSTC)-15, DRAINING
LOF ENGINE COOLANT, REPLACEMENT, En-
gine Coolant.>
2) Remove the air cleaner upper cover and air in-
take boot. <Ref. to IN(H4DOSTC)-10, REMOVAL,
Air Cleaner.>
3) Remove the air cleaner element.
4) Disconnect the engine coolant hoses from cool-
ant filler tank.
5) Remove the bolts and nut which installs coolant
filler tank.
6) Disconnect the engine coolant hose which con-
nects under side of coolant filler tank.
7) Remove the coolant filler tank.
COOLANT FILLER TANK
B: INSTALLATION
1) Install in the reverse order of removal.
Tightening torque:
CO-00160 EN0125
2) Fill
CO(H4DOSTC)-15, FILLING OF ENGINE COOL-
ANT, REPLACEMENT, Engine Coolant.>
CO-00161
CO(H4DOSTC)-33
T1: 19 N·m (1.9 kgf-m, 13.7 ft-lb)
T2: 21 N·m (2.1 kgf-m, 15.2 ft-lb)
the engine coolant.
COOLING
T1
T2
CO-00162
<Ref. to