Subaru Legacy 2003 Service Manual page 1827

STARTING/CHARGING SYSTEMS
2. Starter
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the intercooler.
<Ref. to IN(H4DOSTC)-13, REMOVAL, Intercool-
er.>
3) Disconnect the connector and terminal from
starter.
( B )
(A) Terminal
(B) Connector
4) Remove the starter from transmission.
FU-00009
( A )
SC-00006
SC-00007
SC(H4DOSTC)-6
STARTER
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
50 N·m (5.1 kgf-m, 37 ft-lb)
C: DISASSEMBLY
1. STARTER ASSEMBLY
1) Loosen the nut which holds terminal M of switch
assembly, and then disconnect the connector.
(A) Terminal M
(B) Terminal B
(C) Terminal S
( B )
( A )
( C )
SC-00007
SC-00148