Subaru Legacy 2003 Service Manual page 1830

Hide thumbs Also See for Legacy 2003:

Table of Contents

Assemble in the reverse order of disassembly. Do

the following:

When assembling, apply grease to the following

• Front and rear bracket sleeve bearing

• Armature shaft gear

• Outer periphery of plunger

• Mating surface of plunger and lever

• Gear shaft splines

• Mating surface of lever and clutch

• Ball at the armature shaft end

• Internal and planetary gears

1) When installing shaft assembly to front bracket,

be careful of the following.

• Lever direction

• Internal gear position

• Packing position

2) When installing yoke to the front bracket, match

3) When installing rear bracket, match brush holder

and yoke's groove.

4) When installing switch assembly, catch plunger

protrusion to lever edge.

5) After assembling parts correctly, make sure

starter operates properly.

SC(H4DOSTC)-9

STARTING/CHARGING SYSTEMS

(A) Bolt hole

Chapters

Table of Contents