Subaru Legacy 2003 Service Manual page 2184

Hide thumbs Also See for Legacy 2003:

Table of Contents

SHIFT SOLENOIDS, DUTY SOLENOIDS AND ATF TEMPERATURE SENSOR

5) Apply liquid gasket fully to three holes other than

screw holes on transmission case.

Fluid packing:

THREE BOND 1217B (Part No.

6) Install the oil pan.

Tightening torque:

5 N·m (0.5 kgf-m, 3.6 ft-lb)

7) Fill ATF up to the middle of the "COLD" side on

level gauge by using the gauge hole. <Ref. to AT-

30, Automatic Transmission Fluid.>

8) Check the ATF level. <Ref. to AT-30, Automatic

Transmission Fluid.>

2. ATF TEMPERATURE SENSOR

For installation of ATF temperature sensor, refer to

"Front Vehicle Speed Sensor." <Ref. to AT-56, IN-

STALLATION, Front Vehicle Speed Sensor.>

AUTOMATIC TRANSMISSION

Chapters

Table of Contents