Subaru Legacy 2003 Service Manual page 2226

13) Install the oil charger pipe with O-ring. <Ref. to
AT-84, INSTALLATION, Oil Charger Pipe.>
14) Insert the input shaft while turning lightly by
hand. At this time, not to damage the bushing.
Normal protrusion A:
50 — 55 mm (1.97 — 2.17 in)
A
15) Install the torque converter clutch assembly.
<Ref. to AT-85, INSTALLATION, Torque Converter
Clutch Assembly.>
16) Install the transmission assembly to the vehi-
cle. <Ref. to AT-42, INSTALLATION, Automatic
Transmission Assembly.>
TORQUE CONVERTER CLUTCH CASE
AT-00291
AT-111
C: INSPECTION
Measure the backlash and adjust to within specifi-
cations. <Ref. to AT-121, ADJUSTMENT, Drive
Pinion Shaft.>
AUTOMATIC TRANSMISSION