Subaru Legacy 2003 Service Manual page 2493

Hide thumbs Also See for Legacy 2003:

Table of Contents

MANUAL TRANSMISSION AND DIFFERENTIAL

E: INSPECTION

Replace bearings in the following cases:

• Broken or rusty bearings

• Worn or damaged

• Bearings that fail to turn smoothly or make ab-

normal noise when turned after gear oil lubrication.

2) Drive gear

Replace drive gear in the following cases:

• If their tooth surfaces and shaft are excessively

broken or damaged.

3) Measure clearance between snap ring and inner

race of ball bearing with a thickness gauge.

0.01 — 0.15 mm (0.0004 — 0.0059 in)

If the measurement is not within the specification,

select suitable snap ring.

TRANSFER DRIVE GEAR

Thickness mm (in)

1.53 (0.0602)

1.65 (0.0650)

1.77 (0.697)

Chapters

Table of Contents