Subaru Legacy 2003 Service Manual page 1818

Hide thumbs Also See for Legacy 2003:

Table of Contents

2. Spark Plug

All spark plugs installed on an engine, must be

of the same heat range.

1) Disconnect the ground cable from battery.

2) Remove the air cleaner lower case. <Ref. to

IN(H4DOSTC)-10, REMOVAL, Air Cleaner.>

3) Disconnect the connector from ignition coil.

4) Remove the ignition coil.

5) Remove the spark plugs with the spark plug

1) Disconnect the battery cables, and then remove

the battery and battery carrier.

2) Disconnect the washer motor connector.

3) Disconnect the rear window glass washer hose

from washer motor, then plug connection with a

suitable cap.

4) Remove the two bolts which hold washer tank,

then take the tank away from working area.

IG(H4DOSTC)-5

Chapters

Table of Contents