Subaru Legacy 2003 Service Manual page 2474

12) Remove operating cylinder from transmission.
Non-TURBO model
TURBO model
13) Remove pitching stopper.
14) Set ST.
ST 41099AA000 ENGINE SUPPORT ASSY
MANUAL TRANSMISSION ASSEMBLY
MT-00067
MT-00068
MT-00354
ST
MT-00070
MANUAL TRANSMISSION AND DIFFERENTIAL
15) Separate the clutch release fork from release
bearing. (TURBO model)
(1) Remove the clutch operating cylinder from
transmission.
(2) Remove the plug using 10 mm hexagon
wrench.
(3) Screw the 6 mm dia. bolt into the release
fork shaft, and remove it.
(A) Shaft
(B) Bolt
(4) Raise the release fork and unfasten the re-
lease bearing tabs to free release fork.
NOTE:
Step (4) is required to prevent interference with the
engine when removing the engine from transmis-
sion.
MT-33
MT-00071
( A )
( B )
MT-00072