Subaru Legacy 2003 Service Manual page 1803

LUBRICATION
5. Oil Pan and Strainer
A: REMOVAL
1) Set the vehicle on lift arms.
2) Remove front wheels.
3) Disconnect battery ground cable.
4) Disconnect the connector from mass air flow
sensor.
5) Loosen the clamp (A) which connects air intake
boot to intake duct.
6) Remove the two clips (B) from air cleaner upper
cover.
7) Remove the air intake boot and air cleaner upper
cover.
(B)
8) Remove the intercooler. <Ref. to IN(H4DOSTC)-
13, REMOVAL, Intercooler.>
OIL PAN AND STRAINER
9) Remove pitching stopper.
10) Remove radiator upper brackets.
FU-00009
11) Support engine with a lifting device and wire
ropes.
LU-00026
12) Lift-up the vehicle.
CAUTION:
When lifting up the vehicle, wire rope must be
(A)
raised at the same time.
13) Remove under cover.
LU-00153
LU(H4DOSTC)-14
ME-00213
LU-00097
LU-00028