Subaru Legacy 2003 Service Manual page 2588

3) Remove spring pin and lever.
(A) Pin
(B) Lever
4) Remove clutch pedal and bushings.
( B )
( A )
(A) Clutch pedal
(B) Bushing
5) Remove stopper, clip, O-ring, rod S, and then re-
move spring and bushing S.
( E )
( D ) ( C )
(A) Clip (If equipped)
(B) Bushing S (If equipped)
(C) Spring S (If equipped)
(D) Rod S (If equipped)
(E) Stopper
6) Remove stoppers from clutch pedal.
7) Remove clutch pedal pad.
CLUTCH PEDAL
( A )
( B )
CL-00095
( B )
CL-00096
( B )
( A )
CL-00097
CL-35
2. RHD MODEL
1) Remove clutch switch.
2) Remove clip, pull out clevis pin.
( A )
(A) Clevis pin
3) Remove assist rod, spring and bushing.
4) Remove clutch pedal from clutch pedal bracket.
( A )
( B )
(A) Clutch pedal bracket
(B) Clutch pedal
5) Remove following parts (B to G) from clutch ped-
al bracket (A) as shown in figure.
( B )
( G )
( F )
(A) Clutch pedal bracket
(B) Bushing C
(C) Clip (If equipped)
(D) Bushing S (If equipped)
(E) Spring S (If equipped)
(F) Rod S (If equipped)
(G) Bushing
CLUTCH SYSTEM
CL-00127
CL-00128
( A )
( C )
( D )
( E )
CL-00184