Subaru Legacy 2003 Service Manual page 1684

ENGINE ASSEMBLY
MECHANICAL
24) Install the A/C pressure hoses.
NOTE:
Use new O-rings.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
ME-00625
25) Install the radiator. <Ref. to CO(H4DOSTC)-
24, INSTALLATION, Radiator.>
26) Install the coolant filler tank. <Ref. to
CO(H4DOSTC)-33, INSTALLATION, Coolant Filler
Tank.>
27) Install the window washer tank.
28) Install the battery in the vehicle, and connect
cables.
29) Fill coolant. <Ref. to CO(H4DOSTC)-15, FILL-
ING OF ENGINE COOLANT, REPLACEMENT,
Engine Coolant.>
30) Charge the A/C system with refrigerant. <Ref.
to AC-24, OPERATION, Refrigerant Charging Pro-
cedure.>
31) Remove the front hood stay, and close the front
hood.
32) Take off the vehicle from lift arms.
ME(H4DOSTC)-39