Subaru Legacy 2003 Service Manual page 1692

Hide thumbs Also See for Legacy 2003:

Table of Contents

15.Timing Belt Assembly

1. TIMING BELT

1) Remove the V-belt.

<Ref. to ME(H4DOSTC)-42, REMOVAL, V-belt.>

2) Remove the crankshaft pulley.

<Ref. to ME(H4DOSTC)-44, REMOVAL, Crank-

shaft Pulley.>

3) Remove the belt cover.

<Ref. to ME(H4DOSTC)-46, REMOVAL, Belt Cov-

4) Remove the timing belt guide. (MT vehicles)

TIMING BELT ASSEMBLY

5) If the alignment mark and/or arrow mark (which

indicates rotation direction) on timing belt fade

away, put new marks before removing the timing

belt as follows:

ST 499987500

ME(H4DOSTC)-47

(1) Turn the crankshaft using ST, and align the

alignment marks on crankshaft sprocket, intake

camshaft sprocket (LH), exhaust camshaft

sprocket (LH), intake camshaft sprocket (RH)

and exhaust camshaft sprocket (RH) with notch-

es of belt cover and cylinder block.

CRANKSHAFT SOCKET

(2) Using white paint, put alignment and/or ar-

row marks on the timing belts in relation to the

Chapters

Table of Contents