Subaru Legacy 2003 Service Manual page 2204

3) Install the transfer clutch pipe onto the extension
case, taking care not to bend the pipe.
4) Install the test plug.
Tightening torque:
13 N·m (1.3 kgf-m, 9.4 ft-lb)
(A) Test plug
(B) Extension case
5) Insert the multi-plate clutch, drive plates, driven
plates, and spring retainer.
(A) Spring retainer
(B) Multi-plate clutch (LSD) piston assembly
EXTENSION CASE
AT-00124
( A )
( B )
AT-00122
( A )
( B )
AT-00126
AT-89
6) Install the snap ring using special tools 1, 2, and
3.
ST1 398673600 COMPRESSOR
ST2 498627100 SEAT
ST3 398663600 PLIERS
ST3
E: INSPECTION
• Use forced air to make sure the transfer pipe and
extension case routes are not clogged and do not
leak.
• Measure the extension end play and adjust it to
within specifications.
MPT model
<Ref. to AT-94, MPT MODEL, ADJUSTMENT,
Transfer Clutch.>
VTD model
<Ref. to AT-95, VTD MODEL, ADJUSTMENT,
Transfer Clutch.>
AUTOMATIC TRANSMISSION
ST1
ST2
AT-00121