Subaru Legacy 2003 Service Manual page 1691

MECHANICAL
14.Belt Cover
A: REMOVAL
1) Remove the V-belt. <Ref. to ME(H4DOSTC)-42,
REMOVAL, V-belt.>
2) Remove the crankshaft
ME(H4DOSTC)-44, REMOVAL, Crankshaft Pul-
ley.>
3) Remove the belt cover (LH) (A).
4) Remove the belt cover (RH) (B).
5) Remove the front belt cover (C).
( B )
B: INSTALLATION
1) Install the front belt cover (C).
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
2) Install the belt cover (RH) (B).
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
3) Install the belt cover (LH) (A).
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
( B )
4) Install the crankshaft
ME(H4DOSTC)-44, INSTALLATION, Crankshaft
Pulley.>
5) Install the V-belt. <Ref. to ME(H4DOSTC)-42,
INSTALLATION, V-belt.>
C: INSPECTION
Make sure the cover is not damaged.
BELT COVER
pulley. <Ref. to
( A )
( C )
ME-00064
( A )
( C )
ME-00064
pulley. <Ref. to
ME(H4DOSTC)-46