Subaru Legacy 2003 Service Manual page 1751

EXHAUST
12) Place the turbocharger cover (LH), and tighten
the bolts which install turbocharger cover (LH).
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
13) Lift-up the vehicle.
14) Tighten the bolts which install under side of tur-
bocharger cover (RH).
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
15) Tighten the bolts which install under side of tur-
bocharger cover (LH).
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
16) Install the under cover.
17) Lower the vehicle.
18) Install the intercooler. <Ref. to IN(H4DOSTC)-
14, INSTALLATION, Intercooler.>
CENTER EXHAUST PIPE
EX-00082
EX-00079
EX-00080
EX(H4DOSTC)-10