Subaru Legacy 2003 Service Manual page 1783

COOLING
9. Radiator Main Fan and Fan
Motor
A: REMOVAL
1) Disconnect battery ground cable.
2) Lift-up the vehicle.
3) Remove under cover.
4) Disconnect connector of main fan motor.
5) Lower the vehicle.
6) Remove air intake duct.
7) Disconnect overflow hose.
RADIATOR MAIN FAN AND FAN MOTOR
FU-00009
CO-00095
CO-00156
CO-00086
CO(H4DOSTC)-28
8) Remove reservoir tank.
9) Remove radiator main fan motor assembly.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
When the main fan motor assembly cannot be in-
stalled as is, loosen the sub fan motor assembly
securing bolts to install it.
Tightening torque:
4.9 N·m (0.50 kgf-m, 3.6 ft-lb)
CO-00087
CO-00096
CO-00096
CO-00087