Subaru Legacy 2003 Service Manual page 1702

18.Camshaft
A: REMOVAL
1) Remove the V-belt.
<Ref. to ME(H4DOSTC)-42, REMOVAL, V-belt.>
2) Remove the crankshaft pulley.
<Ref. to ME(H4DOSTC)-44, REMOVAL, Crank-
shaft Pulley.>
3) Remove the belt cover.
<Ref. to ME(H4DOSTC)-46, REMOVAL, Belt Cov-
er.>
4) Remove the timing belt assembly.
<Ref. to ME(H4DOSTC)-47, REMOVAL, Timing
Belt Assembly.>
5) Remove the camshaft sprocket.
<Ref. to ME(H4DOSTC)-55, REMOVAL, Camshaft
Sprocket.>
6) Remove the crankshaft sprocket.
<Ref. to ME(H4DOSTC)-56, REMOVAL, Crank-
shaft Sprocket.>
7) Remove the tensioner bracket.
8) Remove the belt cover No. 2 (LH).
CAMSHAFT
9) Remove the belt cover No. 2 (RH).
10) Disconnect the ignition coil connector.
11) Remove the ignition coil.
12) Remove the rocker cover and gasket.
13) Loosen the intake camshaft cap bolts equally, a
little at a time in alphabetical sequence shown in
the figure.
14) Remove the camshaft cap and intake cam-
shaft.
ME-00105
15) Loosen the exhaust camshaft cap bolts equal-
ly, a little at a time in alphabetical sequence shown
in the figure.
ME-00106
16) Remove the camshaft caps and exhaust cam-
shaft.
NOTE:
Arrange the camshaft caps in order so that they
can be installed in their original positions.
17) Similarly, remove the camshafts (RH) and re-
lated parts.
ME(H4DOSTC)-57
( A )
( E ) ( C )
( D )
( F )
( B )
( A ) ( E ) ( C )
( B ) ( F ) ( D )
MECHANICAL
ME-00107
ME-00369
ME-00370