AUTOMATIC TRANSMISSION
7) Compress the spring retainer, and remove the
snap ring from the low clutch drum, by using ST1
and ST2.
ST1 498627100
SEAT
ST2 398673600
COMPRESSOR
( A )
(A) Snap ring
(B) Low clutch drum
8) Remove one-way clutch. <Ref. to AT-150, RE-
MOVAL, One-way Clutch.>
9) Install the one-way clutch inner race to the low
clutch drum, and apply compressed air to remove
the low clutch piston.
( A )
(A) Apply compressed air
(B) One-way clutch inner race
10) Remove the one-way clutch inner race.
PLANETARY GEAR AND LOW CLUTCH
ST2
ST1
( B )
AT-00265
( B )
AT-00266
11) Remove the one-way clutch after taking out the
snap ring.
( A )
( B )
(A) Snap ring
(B) Plate
(C) One-way clutch
12) Remove the needle bearing after taking out the
snap ring.
( A )
(A) Needle bearing
(B) Snap ring
AT-140
( C )
AT-00267
( B )
AT-00268