Subaru Legacy 2003 Service Manual page 2478

14) Install ball joints of lower arm into knuckle arm
of housing, and tighten installing bolts.
Tightening torque:
50 N·m (5.1 kgf-m, 37 ft-lb)
( A )
(A) Transverse link
(B) Ball joint
15) Install stabilizer link from transverse link.
Non-TURBO model
Tightening torque:
30 N·m (3.1 kgf-m, 22.1 ft-lb)
TURBO model
Tightening torque:
45 N·m (4.6 kgf-m, 33.2 ft-lb)
MANUAL TRANSMISSION ASSEMBLY
( B )
MT-00086
MT-00359
MT-00076
MANUAL TRANSMISSION AND DIFFERENTIAL
16) Connect rod to the joint.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
(A) Joint
(B) Rod
17) Connect stay to transmission bracket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
( A )
(A) Stay
(B) Transmission bracket
18) Install propeller shaft. <Ref. to DS-15, INSTAL-
LATION, Propeller Shaft.>
19) Install heat shield cover. (If equipped)
MT-37
( A )
( B )
MT-00089
( B )
MT-00360
MT-00355