Subaru Legacy 2003 Service Manual page 2570

C: INSPECTION
1. CLUTCH DISC
1) Facing wear
Measure the depth of rivet head from the surface of
facing. Replace if facings are worn locally or worn
down to less than the specified value.
Depth of rivet head:
Limit of sinking
0.3 mm (0.012 in)
NOTE:
Do not wash clutch disc with any cleaning fluid.
Europe and Australia Non-Turbo models
Except Europe and
models and Turbo model
2) Hardened facing
Correct by using emery paper or replace.
CLUTCH DISC AND COVER
CL-00116
Australia Non-Turbo
CL-00014
3) Oil soakage on facing
Replace clutch disc and inspect transmission front
oil seal, transmission case mating surface, engine
rear oil seal and other points for oil leakage.
Europe and Australia Non-Turbo models
(A) Clutch facing
Except Europe
models and Turbo model
(A) Clutch facing
CL-17
CLUTCH SYSTEM
( A )
CL-00117
and Australia Non-Turbo
( A )
CL-00015