Subaru Legacy 2003 Service Manual page 1784

C: DISASSEMBLY
1) Remove clip which holds motor connector onto
shroud.
2) Remove nut which holds fan itself onto fan motor
and shroud assembly.
3) Remove bolts which install fan motor onto
shroud.
D: ASSEMBLY
Assemble in the reverse order of disassembly.
RADIATOR MAIN FAN AND FAN MOTOR
CO-00046
CO-00097
CO-00098
CO(H4DOSTC)-29
Tightening torque:
4.4 N·m (0.45 kgf-m, 3.3 ft-lb)
Tightening torque:
3.4 N·m (0.35 kgf-m, 2.5 ft-lb)
E: INSPECTION
1) Connect battery positive (+) terminal to terminal
No. 2, and negative (−) terminal to terminal No. 1 of
main fan motor connector.
2) Make sure the main fan motor operates properly.
Replace it if it doesn't.
COOLING
CO-00098
CO-00097
1 2
F17
To
CO-00099