Subaru Legacy 2003 Service Manual page 2176

B: INSTALLATION
1) Set the range select lever in "N" range.
2) Install the control valve, ATF temperature sensor
and ground connectors.
Tightening torque:
8 N·m (0.8 kgf-m, 5.8 ft-lb)
( A )
( A )
( B )
( B )
( B )
Bolt length mm (in)
(A) 30 (1.18)
(B) 55 (2.17)
3) Connect all connectors.
( C )
( A )
( G )
(A) Lock-up duty solenoid (Blue)
(B) Low clutch timing solenoid (Gray)
(C) Line pressure duty solenoid (Red)
(D) Shift solenoid 2 (Yellow)
(E) Shift solenoid 1 (Green)
(F) 2-4 brake timing solenoid (Black)
(G) 2-4 brake duty solenoid (Red)
(H) ATF temperature sensor
(I) Transfer duty solenoid (Brown)
(J) Sport shift solenoid (Beige) (if equipped)
CONTROL VALVE BODY
( A ) ( A ) ( A )
( A )
( A )
( B )
( B )
( A )
AT-00062
( B )
( D )
( E )
( J )
( I )
( H )
( F )
AT-00902
4) Install the pipe. (TURBO model)
Tightening torque:
8 N·m (0.8 kgf-m, 5.8 ft-lb)
5) Attach the magnet at specified position.
6) Apply proper amount of liquid gasket to the en-
tire oil pan mating surface.
Liquid gasket:
THREE BOND 1217B (Part No.
K0877YA020)
AT-61
AUTOMATIC TRANSMISSION
AT-00801
AT-00057
AT-00051