Subaru Legacy 2003 Service Manual page 2475

MANUAL TRANSMISSION AND DIFFERENTIAL
16) Remove bolt which holds right upper side of
transmission to engine.
17) Remove under cover.
18) Remove front and center exhaust pipes. (Non-
TURBO model)
Without OBD
<Ref. to EX(H4SOw/oOBD)-9, REMOVAL, Front
Exhaust Pipe.>
With OBD
<Ref. to EX(H4SO)-5, REMOVAL, Front Exhaust
Pipe.>
19) Remove center exhaust pipe. (TURBO model)
<Ref. to EX(H4DOSTC)-7, REMOVAL, Center Ex-
haust Pipe.>
20) Remove rear exhaust pipe and muffler.
Non-TURBO model without OBD
<Ref. to EX(H4SOw/oOBD)-13, REMOVAL, Rear
Exhaust Pipe.> and <Ref. to EX(H4SOw/oOBD)-
14, REMOVAL, Muffler.>
Non-TURBO with OBD
<Ref. to EX(H4SO)-9, REMOVAL, Rear Exhaust
Pipe.> and <Ref. to EX(H4SO)-10, REMOVAL,
Muffler.>
TURBO model
<Ref. to EX(H4DOSTC)-12, REMOVAL, Rear Ex-
haust Pipe.> and <Ref. to EX(H4DOSTC)-13, RE-
MOVAL, Muffler.>
21) Remove heat shield cover. (If equipped)
MANUAL TRANSMISSION ASSEMBLY
MT-00073
MT-00355
22) Remove hanger bracket from right side of
transmission.
23) Remove propeller shaft. <Ref. to DS-14, RE-
MOVAL, Propeller Shaft.>
24) Remove gear shift rod and stay from transmis-
sion.
(1) Disconnect stay from transmission.
(2) Disconnect rod from transmission.
(A) Stay
(B) Rod
25) Disconnect stabilizer link from transverse link.
26) Remove bolt securing ball joint of transverse
link to housing.
MT-34
MT-00074
( A )
( B )
MT-00075
MT-00356