Subaru Legacy 2003 Service Manual page 1678

(4) Remove the power steering pump from en-
gine.
(5) Remove the power steering tank from
bracket by pulling it upward.
(6) Place the power steering pump on right side
wheel apron.
14) Lift-up the vehicle.
15) Remove the ATF cooler pipe from frame. (AT
vehicles)
16) Remove the center exhaust pipe. <Ref. to
EX(H4DOSTC)-7, REMOVAL, Center Exhaust
Pipe.>
ENGINE ASSEMBLY
17) Remove the nuts which hold lower side of
transmission to engine.
ME-00037
18) Remove the nuts which install front cushion
rubber onto front crossmember.
ME-00038
19) Lower the vehicle.
20) Separate the clutch release fork from release
bearing. (MT vehicles)
(1) Remove the clutch operating cylinder from
transmission.
(2) Remove the plug using a 10 mm hexagon
wrench.
ME-00039
ME(H4DOSTC)-33
MECHANICAL
ME-00040
ME-00041
ME-00042