Subaru Legacy 2003 Service Manual page 1786

2) Remove nut which holds fan itself onto fan motor
and shroud assembly.
3) Remove bolts which install fan motor onto
shroud.
D: ASSEMBLY
Assemble in the reverse order of disassembly.
Tightening torque:
4.4 N·m (0.45 kgf-m, 3.3 ft-lb)
Tightening torque:
3.4 N·m (0.35 kgf-m, 2.5 ft-lb)
RADIATOR SUB FAN AND FAN MOTOR
CO-00102
CO-00098
CO-00098
CO-00102
CO(H4DOSTC)-31
E: INSPECTION
1) Connect battery positive (+) terminal to terminal
No. 2, and negative (−) terminal to terminal No. 1 of
sub fan motor connector.
2) Make sure the sub-fan motor operates properly.
Replace it if it doesn't.
COOLING
1 2
F16
To
CO-00104