Subaru Legacy 2003 Service Manual page 2641

REAR SUSPENSION
B: INSTALLATION
Install in the reverse order of removal, observing
the following instructions.
CAUTION:
• Using transmission jack, support rear arm
horizontally, install link rear and tighten nuts to
specified torque.
( 1 )
(1) Rear arm
(2) Transmission jack
• Tighten nut when installing adjusting bolt.
• Replace self-locking nut.
NOTE:
Check wheel alignment and adjust if necessary.
C: DISASSEMBLY
Using ST-A, B, press bushing out of place.
ST-A, B 20099AE000INSTALLER & REMOVER
D: ASSEMBLY
Using ST-A and ST-B, press bushing into place.
ST-A, B 20099AE000INSTALLER & REMOVER
LINK REAR
( 2 )
RS-00052
ST-A
ST-B
RS-00083
ST-A
ST-B
RS-00083
E: INSPECTION
Visually check link rear for damage or bends.
RS-20