Subaru Legacy 2003 Service Manual page 2213

AUTOMATIC TRANSMISSION
NOTE:
Measure multi-plate clutch (LSD) driven and drive
plate thickness to find the clearance between mea-
surement value and "T".
Standard value:
0.2 — 0.6 mm (0.008 — 0.024 in)
Limit value:
1.6 mm (0.063 in)
If outside the standard value, replace the plate set
(drive and driven plate). Select a multi-plate clutch
(LSD) piston side adjustment plate that will bring
clearance within the standard value.
Obtainable driven plates
Part No.
31589AA041
31589AA050
31589AA060
31589AA070
MULTI-PLATE CLUTCH
Thickness mm (in)
1.6 (0.063)
2.0 (0.079)
2.4 (0.094)
2.8 (0.110)
AT-98