Subaru Legacy 2003 Service Manual page 2380

DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)
Step
8 CHECK HARNESS CONNECTOR BETWEEN
SPORT SHIFT SOLENOID AND TRANSMIS-
SION.
Measure resistance of harness between shift
solenoid 1 and transmission connector.
Connector & terminal
(AT10) No. 1 — (T4) No. 8:
Is the measured value less than the specified
value?
9 CHECK HARNESS CONNECTOR BETWEEN
SPORT SHIFT SOLENOID AND TRANSMIS-
SION.
Measure resistance of harness between
SPORT shift solenoid connector and transmis-
sion ground.
Connector & terminal
(T4) No. 8 — Transmission ground:
Does the measured value exceed the specified
value?
AUTOMATIC TRANSMISSION (DIAGNOSTICS)
Value
1 Ω
1 MΩ
AT-105
Yes
Go to step 9. Repair open circuit
in harness
between SPORT
shift solenoid and
transmission con-
nector.
Even if "POWER" Repair short circuit
indicator lights up, harness between
the circuit has SPORT shift sole-
returned to a nor- noid and transmis-
mal condition at sion connector.
this time. A tempo-
rary poor contact
of the connector or
harness may be
the cause. Repair
harness or con-
nector in SPORT
shift solenoid and
transmission.
No