Subaru Legacy 2003 Service Manual page 1828

2) Remove the bolts which hold switch assembly,
and then remove the switch assembly, plunger and
plunger spring from starter as a unit.
NOTE:
Be careful because the pinion gap adjustment
washer may sometimes be used on the mounting
surface of switch assembly.
( B )
( A )
(A) Switch ASSY
(B) Plunger
3) Remove both through-bolts and brush holder
screws, and then detach the rear cover and brush
holder.
(A) Brush holder
(B) Rear bracket
STARTER
SC-00149
( A )
( B )
SC-00150
SC(H4DOSTC)-7
STARTING/CHARGING SYSTEMS
4) Remove the armature and yoke from front brack-
et.
( D )
(A) Armature
(B) Ball
(C) Yoke
(D) Front bracket
5) Remove the packing A, planetary gear, packing
B and plate.
( C )
( D )
(A) Packing A
(B) Planetary gear
(C) Plate
(D) Packing B
( C )
( A )
( B )
SC-00151
( A )
( B )
SC-00152